Oversea Warehouse - Australia - United States - United Kingdom


TRACER1215 MPPT CONTROLLER	TRACER2215 MPPT CONTROLLER	TRACER3215 MPPT CONTROLLER	TRACER4210 MPPT CONTROLLER


eTracer-ET2415	eTracer-ET3415	eTracer-ET4415	eTracer-ET6415


Dual battery charge controllers	LS Waterproof controller	VS Solar Controller

Tracer1215 MPPT 10A 150V Solar Charge Controller

True MPPT,transformer coil inside.

Tracer is an advanced Maximum Power Point Tracking MPPTcontroller for off-grid photovoltaic (PV) systems. The controller provides higher efficiency up to 97% with lower power loss..

Features:
·MPPT technology
·Peak conversion efficiency of 97%
·High Tracking efficiency of 99%
·Several seconds tracking speed
·4-Stage charge with PWM output
·Nature convection cooling
·Full power output in ambient temperature up to 45 ℃
·Temperature compensation
·Sealed, Gel and Flooded battery option
·Widely used, automatically recognize day/night
·Diversified load control
·RJ45 interface &optional meter
·2 years warranty
·CE certificate

Electronic Protections：
·PV array short circuit
·Over discharging
·Over charging
·Load overload
·Load short circuit
·PV reverse polarity
·Battery reverse polarity

Model	Tracer-1206RN	Tracer-1210RN	Tracer-1215RN
Rated system voltage	12/24V?auto work
Rated battery current	10A
Rated load current	10A
Max.battery voltage	32V
Max.PV?open circuit voltage	60VDC	100VDC	150VDC
Max.PV input power	12V ??130W;? 24V ??260W
Self-consumption	<10mA（24V）
Charge Circuit Voltage Drop	≤0.26V
Discharge Circuit Voltage Drop	≤0.15V
Communication	TTL232 / 8 pin RJ45
Temp.compensation	-30mV/℃/12V（25℃）
Working temperature	-35℃～+55℃
Storage temperature range	-35℃～+80℃
Humidity	10%-90% NC
Enclosure	IP30
Altitude	≤3000m
Dimension	156mm x 97mm x 68mm
Mounting holes	147mm x 60mm
Mounting hole size	Φ5
Terminal	4mm2
Weight	0.55kg

Tracer2215 MPPT 20A 150V Solar Charge Controller

True MPPT,transformer coil inside.

?

Tracer is an advanced Maximum Power Point Tracking MPPTcontroller for off-grid photovoltaic (PV) systems. The controller provides higher efficiency up to 97% with lower power loss..

Model	Tracer-2210RN	Tracer-2215RN
Rated system voltage	12/24V?auto work
Rated battery current	?20A
Rated load current	20A
Max.battery voltage	32V
Max.PV?open circuit voltage	100VDC	150VDC
Max.PV input power	12V 260W，? 24V 520W
Self-consumption	<10mA（24V）
Charge Circuit Voltage Drop	≤0.26V
Discharge Circuit Voltage Drop	≤0.15V
Communication	TTL232 / 8 pin RJ45
Temp.compensation	-30mV/℃/12V（25℃）
Working temperature	-35℃～+55℃
Storage temperature range	-35℃～+80℃
Humidity	10%-90% NC
Enclosure	IP30
Altitude	≤3000m
Dimension	169mm x 118mm x 83mm
Mounting holes	160mm x 80mm
Mounting hole size	Φ5
Terminal	10mm2
Weight	0.95kg

Tracer3215 MPPT 30A 150V Solar Charge Controller

True MPPT,transformer coil inside.

Tracer is an advanced Maximum Power Point Tracking MPPTcontroller for off-grid photovoltaic (PV) systems. The controller provides higher efficiency up to 97% with lower power loss..

Model	Tracer-3215RN
Rated system voltage	12/24V?auto work
Rated battery current	?30A
Rated load current	20A
Max.battery voltage	32V
Max.PV?open circuit voltage	150VDC
Max.PV input power	12V 390W，? 24V 780W
Self-consumption	<10mA（24V）
Charge Circuit Voltage Drop	≤0.26V
Discharge Circuit Voltage Drop	≤0.15V
Communication	TTL232 / 8 pin RJ45
Temp.compensation	-30mV/℃/12V（25℃）
Working temperature	-35℃～+55℃
Storage temperature range	-35℃～+80℃
Humidity	10%-90% NC
Enclosure	IP30
Altitude	≤3000m
Dimension	242mm x 169mm x 91mm
Mounting holes	180mm x 160mm
Mounting hole size	Φ5
Terminal	25mm2
Weight	2kg

Tracer4210 MPPT 40A 100V Solar Charge Controller

Tracer is an advanced Maximum Power Point Tracking MPPTcontroller for off-grid photovoltaic (PV) systems. The controller provides higher efficiency up to 97% with lower power loss..

Model	Tracer-4210RN
Rated system voltage	12/24V?auto work
Rated battery current	?40A
Rated load current	20A
Max.battery voltage	32V
Max.PV?open circuit voltage	100VDC
Max.PV input power	12V 520W，? 24V 1040W
Self-consumption	<10mA（24V）
Charge Circuit Voltage Drop	≤0.26V
Discharge Circuit Voltage Drop	≤0.15V
Communication	TTL232 / 8 pin RJ45
Temp.compensation	-30mV/℃/12V（25℃）
Working temperature	-35℃～+55℃
Storage temperature range	-35℃～+80℃
Humidity	10%-90% NC
Enclosure	IP30
Altitude	≤3000m
Dimension	242mm x 169mm x 91mm
Mounting holes	180mm x 160mm
Mounting hole size	Φ5
Terminal	25mm2
Weight	2.05kg

eTracer2415,eTracer3415,eTracer4415,eTracer6415 Network MPPT Soalr Charge Controller

Network MPPT Solar charge controller eTracer series eTracer is an advanced Maximum Power Point Tracking (MPPT) controller for off-grid photovoltaic (PV) systems up to 3KW. The controller features a smart tracking algorithmthat maximizes the energy harvest from the PV by rapidly finding the solar array peak power point in all the weather condition. The controller provides higher efficiency up to 98% with lower power loss.Include up to 450 days data logging by connecting to Ethernet.

Features：
◆ 12/24/36/48V auto work
◆Advanced MPPT technology
◆Several seconds tracking speed
◆High Tracking efficiency of 99%
◆Multiphase synchronous rectification technology
◆Peak conversion efficiency of 98%
◆DSP&ARM processors architecture ensures high speed

and performance
◆Multifunction LCD displays system data and status
◆Three kinds of communication ports :RS232, CAN BUS

and Ethernet
◆Three stages charging optimizes battery performance
◆Software update by users

Electronic Protections:

◆PV array short circuit

◆PV over current

◆Over charging
◆PV reverse polarity
◆PV over voltage
◆Battery reverse polarity
◆Overheating protection

Technical data:

Model	ET2415N	ET3415N	ET4415N	ET6415N
Nominal System Voltage	12V/24V /36V/48V auto work
Rated Battery Current	20A	30A	45A	60A
Max. PV open circuit voltage	150V
Voltage range	8~72V
Max. PV input power	260W (12V)	400W (12V)	600W (12V)	800W(12V)
	520W (24V)	800W? (24V)	1200W（24V)	1600W(24V)
	780W (36V)	1200W (36V)	1800W(36V)	2400W(36V)
	1040W (48V)	1600W (48V)	2400W(48V))	3200W(48V)
Self-consumption	1.4～2.2W
Grounding	Negative

Dual battery solar charge controller 10A,20A

·Two battery charging eliminates the extra cost of two separate solar charging system
·Intelligent System Optimum Control
·12/24V auto work
·Battery type selection
·Charging frequency optional
·High efficient Series PWM charging
·Local external temperature compensation
·Remote temperature sensor optional
·Use MOSFET as electronic switch, without any mechanical switch
·Remote meter MT-1 optional
·Electronic protection: over charging, short circuit, battery reverse polarity protection

Electrical
System voltage	12 / 24VDC Auto work
Nominal battery current	10A,20A
Charge circuit voltage drop	≤0.26V
Discharge circuit voltage drop	≤0.15V
Self consumption	≤6mA
Working temperature	-35℃?to +55℃
Humidity	10%-90% NC
Enclosure	IP30
Terminal???	4mm2
Net weight	0.15KG

Battery voltage parameters (temperature at 25°C)
Battery charging setting	Sealed	Flooded	Gel
Equalize charging voltage	14.4 V;x2/24V	14.6V;x2/24V	14.8V;x2/24V
Boost charging voltage	14.2V;x2/24V	14.4V;x2/24V	14.6V;x2/24V
Float charging voltage	13.7V;x2/24V	13.7V;x2/24V	13.7V;x2/24V
Max. solar voltage	30V（12V system）,55V(24V system)
Battery voltage range	8-15V(12V system),8-30V(24V system)
Self-consumption	4mA at night, 10mA at charging
Meterbus connection	8-pin RJ-45
Temp. compensation	-30mv/℃/12V

MT-1 meter for Dual battery solar controller

MT-1 is an optional accessory for EPIPDB-COM series solar charge controller. The LCD displays the system status and parameters clearly.

Features:
·Display the system status and parameters with digital and graphic icon.
·Battery type selectable
·Battery Ah setting function
·Temperature compensation coefficient adjustable
·Four keys to solve the setting easily
·Control the load by manual

Rated voltage	12V, min voltage (suggest): 8.0V
Strong backlight on	<23mA
Low backlight on	<20mA
Backlight and LED indicator off	<17mA
Operation temperature	-40℃?~ +60℃
LCD operation temperature	-10℃?~ +40℃
Humidity	0-100%
Communication cable	RJ45(8PIN), 10 meter

LS1024RP,LS2024RP 10A,20A Waterproof Solar Charge Controller

Features：
·Waterproof design
·High efficient Series PWM charging
·Gel, Sealed and Flooded battery type option
·Widely used, automatically recognize day/night
·Intelligent timer function with 1-15 hours option
·Use MOSFET as electronic switch
·Digital LED menu with simple setting and easy using
·Temperature compensation
·Reverse protection: any combination of solar module and battery

Electronic Protections:
·Overheating
·Over discharging
·Over charging
·Load overload
·Load short circuit
·PV short circuit
·PV reverse polarity
·Battery reverse polarity

Electrical parameters	LS1024RP	LS2024RP
Nominal System Voltage	12 / 24VDC auto work
Rated Battery Current	10A	20A
Max. Battery Voltage	32V
Charge Circuit Voltage Drop	≤0.26V
Discharge Circuit Voltage Drop	≤0.15V
Self-consumption	≤6mA
Overall dimension	145 x 69 x 31mm	145 x 85x 34mm
Wire diameter	4mm2	6mm2
Net weight	0.3kg	0.4kg
Working temperature	-35℃?to +55℃
Humidity	10%-90% NC
Enclosure	IP30

Battery Voltage Parameters (temperature at 25℃)
Battery charging setting	Gel	Sealed	Flooded
Equalize Charging Voltage	——	14.6V;x2/24V	14.8V;x2/24V
Boost Charging Voltage	14.2V;x2/24V	14.4V;x2/24V	14.6V;x2/24V
Float Charging Voltage	13.8V;x2/24V	13.8V;x2/24V	13.8V;x2/24V
Low Voltage Reconnect Voltage	12.6V;x2/24V	12.6V;x2/24V	12.6V;x2/24V
Low Voltage Disconnect Voltage	11.1V;x2/24V	11.1V;x2/24V	11.1V;x2/24V
Equalize Duration	——	2 hours	2 hours
Boost Duration	2 hours	2 hours	2 hours

VS Series 10A-60A Solar Charge Controller

Features：
·Adopt graphics dot-matrix LCD screen and HMI (human-machine interface) with 4 buttons, integrated menu displaying and operation
·32 bit MCU with high speed
·12 bit A/D high-precision sampling to ensure accuracy
·Excellent EMC design
·High efficient Series PWM charging
·Use MOSFET as electronic switch
·Widely used, automatically recognize day/night
·Humanized design of browser interface, undertake every operating conveniently
·Full control parameters setting and modification, diversified load control mode
·Gel, Sealed and Flooded battery type option
·Adopt temperature compensation, correction algorithm for charging and discharging parameters automatically

Electronic Protections：
·Overheating
·Over discharging
·Over charging
·Load overload
·Load short circuit
·PV reverse polarity
·Battery reverse polarity

Electrical parameters	VS1024N	VS2024N	VS3024N	VS4024N	VS5024N	VS6024N
Normal system voltage	12V/24V auto work
Rated battery current	10A	20A	30A	40A	50A	60A
Max. battery voltage	32V
Self-consumption	≤18mA
Communication	TTL232 / 8pin RJ45
Equalize Charging Voltage	Sealed：14.6V;x2/24V?Flooded：14.8V;x2/24V
Boost Charging Voltage	Gel：14.2V;x2/24V Sealed：14.4V;x2/24V?Flooded：14.6V;x2/24V
Float Charging Voltage	13.8V;x2/24V
Low Voltage Reconnect Voltage	12.6V;x2/24V
Low Voltage Disconnect Voltage	11.1V;x2/24V
Temp. compensation	-30mV/℃/12V（25℃）
Relative humidity	10%~90% Non-condensation
Working temperature	-20℃?to +55℃
Enclosure	IP20

Electrical parameters	VS2048N	VS3048N	VS4048N	VS5048N	VS6048N
Normal system voltage	12V/24/48V auto work
Rated battery current	20A	30A	40A	50A	60A
Max. battery voltage	64V
Self-consumption	≤18mA
Communication ?	TTL232 / 8pin RJ45
Equalize Charging Voltage	Sealed：14.6V;x2/24V? Flooded：14.8V;x2/24V
Boost Charging Voltage	Gel：14.2V;x2/24V Sealed：14.4V;x2/24V? Flooded：14.6V;x2/24V
Float Charging Voltage	13.8V;x2/24V
Low Voltage Reconnect Voltage	12.6V;x2/24V
Low Voltage Disconnect Voltage	11.1V;x2/24V
Temp. compensation	-30mV/℃/12V（25℃）
Relative humidity	10%~90% Non-condensation
Working temperature	-20℃?to +55℃
Enclosure	IP20